1. Overlay
A highly resistant surface layer with corundum (AL2O3), impregnated with melamine resins. This paper gives the floor greater resistance to wear and tear.

2. Decorative Paper
Designed paper treated with melamine resns. Advantage
Endless design possibilities offering outstanding choice.

3. Core-Tech 500 HR
Water-resistant, high-density fibre board. Very effective damp resistance.

4. Special Balanceing Paper
Lower layer coating the plank. Reinforces the floor's stability.

5. Optional Underlay (Confort+Range)
Polyethylene foam layer built in to the underside of the floor. Reduces the noise and vibrations from the impact of footsteps.

 Demo Video

• Start laying the floor as indicated in the instructions.
• Note how the strip design continues over two planks without a break.
• The result is a floor that looks as if it was made of longer strips.

 Demo Video

• Start laying the floor as indicated in the installation instructions.
• Note how the strip design continues over three planks without a break.
• The result is a floor that looks as if it were made of extremely long wooden strips.

 Demo Video

• To achieve the desired effect, fit the lower plank half-way down the previously laid plank.
• Note how the plank design continues in all directions.
• The result is an extremely realistic random design.

 Demo Video

• To create your own herringbone design, install the lower plank half-way down the previously laid plank.
• As always, the floor is fast and easy to lay
• Note that by proceeding in the same way but installing the lower plank only a quarter of the way down the upper one , you will achieve a diamond design.
• Laying this design is just as fast and easy as the herringbone version.
• The result will be an original diamond pattern. Both options give a perfect, highly stylish finish with no visible joints.
• You can create other designs by experimenting with the position of the planks

 Demo Video

• Unique on the market, jointguard is our system for the protection of joints.
• The seam resulting from the laying of two planks is slightly lower than the surface of the planks themselves. this difference in surface height protects the joint.
• Similarly note how this slight lowering of the plank joints protects them from direct knocks for longer life.

 Demo Video

• Each plank is completely coated with a corundum-reinforced overlay.
• This system also protects the subtle microbevel between the strips forming each plank.
• Note how the end result looks like real parquet, but with fewer joints for longer floor life.

 Demo Video

• An interactive innovation from faus, Realfeel faithfully reproduces completely natural looking materials no matter what the choice: ceramic, stone or wood.
• See how the plank looks and feels just like the real thing.

Thanks to the combination of all the technologies, Faus have created an amazingly long-lasting floor. A surface that can resist the passing of time and remain in perfect condition. The guarantees are for 15 years, 25 years, and lifetime for domestic use (depending on the price range), and for 5 years for commercial use.